Product Assistance
Dear Craig, we have not seen such a solution, unless an electrician can make this happen. From our perspective, it would be easier to install solar light with a motion sensor that will be turned once someone or car approaches within the range (usually about 10m, 120'). You can check a few options here: https://sunnybunny.com.au/solar-sensor-lights/
The battery is replaceable. We supply batteries and other spare parts for the solar lights we sell.
The height of the mounting part that attaches to the wall is 13cm and the width is 8.5cm
There are few lights with a timer that can be set to turn the light off at night after lighting up for certain hours. It works this way: the light turns on automatically at night and stays on for selected hours then turns off.
Unfortunately, we do not have a solution that would allow switching the light on and off at a certain time.
It is ~70mm x 50mm
120W and 180W models have the same arm pole mount that can fit the lighting pole up to 75mm. The recommended installation height is 5m and 6m for 180W.
120W the solar panel is 1.8kg, the light head is 3.46kg.
180W solar panel is 2.1kg, the light head is 3.7kg.
There is an extension cord available for this product +5m. For the warm white light model, each light head has to be extended separately, so for the full product, you will need x4 extension cables or just x1. For the multicolour light model, all 4 light heads have to be extended with just x1 extension cable.
If you are interested, please, reach out to our support team: [email protected] so it can be arranged
No, Warm White Is not one of the 7 colours. The Multicolour model won't cover the features of both models available for sale.
Usually, the longevity depends on few factors including the application environment (how many sunny days, how often the battery get fully charged etc), but in general, we recommend reassessing the battery if solar powered lights are in about 1.5-2 years. If there is a decline in performance, in some cases the battery can be replaced. These particular lights come with 12 months warranty, so if there is any issue within few months, the product will be replaced under warranty.
As to the connected lights, there are no solar stud lights with this grade of protection from the impact that is linked to one solar panel, but we have similar solar ground deck lights that you may have a look at: https://sunnybunny.com.au/solar-lights/solar-path-lights/stainless-steel-in-ground-buried-solar-deck-lights-outdoor-kit.html#/74-emitting_colour-white/139-model-6pcs
Yes, we can supply extra lights that can be connected to the string. However, as the solar powered product is designed to be able to power 6 or 8 lights with a certain brightness for a period of time etc, we have to inform you that any extra lights will decrease the performance of the product.
1. The length is 50m
2. There is no option to detach the solar panel from the string with this product.
The lights are not designed to be connected in a chain, as each lighting set is powered by its own battery pack and solar panel.
The cord between the light and the solar panel is 4.7m
The flood light has a universal mounting that is not restricted to any particular type or surface. However, for the pole, you may have to do a little bit of DIY work as the light does not come with a ready-to-go pole installation solution. Each light head and the solar panel has brackets. All need to be done is to fit them onto the pole. There are various ways to do so.
For the mounting brackets in place please refer to the photos and video in the product description
The red LED light is blinking during the day when the product is charging under direct sunlight. Each light is independent with its own battery inside
For the dimensions of the light, please, refer to one of the photos of the product where it is displayed in the diagram.
This particular light you are looking at is coming with a motion sensor and it cannot be disabled.
If you require the floodlight without the motion sensor, this is the same item that operates as a regular floodlight, automatically operated dusk to dawn. This is also the brightest option out of the lights below:
Alternatively, you can also have a look at these floodlights that do not have motion sensor function:
There are no specific recommendations or limitations regarding the surface suitable for the installation of the path stud lights. They can be screwed, glued etc to almost any surface as far as it is secure and safe. What is crucial for the lights is the full sunlight exposure so the solar panel is able to recharge the battery.
We would strongly advise installing the set with the guidewire as it will protect the fairy lights from damage from the severe wind and other weather conditions and prolong their longevity.
Originally, we have this solar light in two models: 80 COB LED and 42 LED. The specs for both models are the same, the only difference was the lighting elements. The manufacturer stopped producing COB LED models, so we are currently supplying only 42 LED models.
80 COB LED models are out of stock, so 42 LED model is available for purchase.
The product is covered with a 12 months general warranty for manufacturing faults and defects including the battery. The operational life of the battery is 2 years, however, it may vary depending on the operational conditions including the correct installation, climate and weather environment.
Yes, this product allows locking one chosen colour to perform all the time. The first press on the button turns the light on in auto colour-changing mode, a second press will lock the current colour to stay permanently, the third press will turn the light off.
Yes, the battery in the product is replaceable, and we can also supply it by request. In order to replace the battery, it requires to open the battery box behind the solar panel, unplug the old battery and plug a new battery in.
The light has a timer that is only able to turn the light off after certain hours (as selected) but not ON. In automatic setup (operation dusk to dawn automatically), the light will come up at night (based on daylight sensor – dusk to dawn), and then, if the timer is set, it will turn off after selected hours (4, 6h). The next day the cycle will repeat.
